Hydrant Valve & Accessories

A fire hose pipe or a firehose is a high-pressure hose that carries foam or water within it to extinguish the fire. It can be attached to a fire engine or a fire hydrant outdoors and indoors, and can be attached to a building's plumbing system permanently. Fire hoses are commonly used for crowd control like water cannons. The hose is essentially the most basic piece of fire fighting equipment.

Firstly, turn on the stop valve and then run out the hose as much is required.
Secondly, turn the water on at the nozzle and direct the steam to the firebase.
Thirdly, you must ensure to leave the egress path between you and the nearest egress route.

A hose coupling is a connector placed at the end of a hose that connects it with another hose or a hose appliance just like an irrigation sprinkler. It comes with a varied number of designs. They are used as a standard low-pressure fire fitting and have two similar locking heads. The most popular fire hose delivery coupling is BS 336 available in stainless steel and gunmetal. They can also be connected to the hydrant valves, nozzles and breechings.

Gunmetal or red brass is a type of bronze made up of copper, tin and zinc. Gunmetal has been in use for thousands of years. It has largely been replaced by steel.

                             Hydrant adapters or fire hose are essentially the fittings that help to connect fire hoses to nozzles in a secure manner. These adapters are available in different sizes. They can also be connected to hydrants, fire trucks and various other water sources. They connect to the threads on fire hydrants and other available equipment. This helps in facilitating a connection.

How to use a Hydrant Adapter?

Thread type determines which hose and equipment can connect. Male ends connect only to the female ends of the same size. Hydrant adapters have threaded ends. They vary in angle, space and diameter. If you try to mix these angles, you can witness leakage from the fittings or under pressure fly off. This can be highly hazardous to the fire-fighters and the people they are protecting. NST (National Standard Thread) is the most commonly accepted and widely used thread.

Fire trucks usually supply water from their tanks in case of smaller fires. However, for bigger fires, fighters depend on external water sources. Hydrants assure steady and secure water supply from underlying water networks.

Gunmetal or red brass is a type of bronze made up of copper, tin and zinc. Gunmetal has been in use for thousands of years. It has largely been replaced by steel.

Branch pipes along with nozzles are used for jet spray applications and wash down. They can be connected to a lay-flat fire hose with the help of fire hose couplings. Branch pipe is a fire fighting nozzle that is used most commonly by most fire brigades. They create a jet pattern which is a jet pattern of water flow with farthest and maximum reach.

a) Compact design
b) Sturdy
c) Efficient
d) Robust construction 

In a case of fire – it is always said ‘better ready than sorry'. In all cases, it is very important to be ready with all that is required, in case, fire breaks out.

There are numerous kinds of fire fighting devices available in the market today that can be used in fighting a fire. There are many of such equipment that can be effectively used for stopping a fire in its early stages and on the other hand, you have things like the fire hose reels that can be very effective in assisting us in stopping a fire before it expands and creates further damage and loss to life and property.

We are  supplier of fire fighting equipment matching up with the ever increasing requirements of the customers, our company is engaged in providing fire fighting hose reel pipe.

Hydrant adapters or fire hose are essentially the fittings that help to connect fire hoses to nozzles in a secure manner. These adapters are available in different sizes. They can also be connected to hydrants, fire trucks and various other water sources. They connect to the threads on fire hydrants and other available equipment. This helps in facilitating a connection.

Branch pipes along with nozzles are used for jet spray applications and wash down. They can be connected to a layflat fire hose with the help of fire hose couplings. Branch pipe is a fire fighting nozzle which is used most commonly by most fire brigades. They create a jet pattern which in jet pattern of water flow with farthest and maximum reach.

a) Compact designpal
b) Sturdy
c) Efficient
d) Robust construction

A hose coupling is a connector placed at the end of a hose that connects with another hose or a hose appliance like an irrigation sprinkler. It comes with a varied number of designs. They are used as a standard low-pressure fire fitting. They have two similar locking heads. The most popular one is BS 336 available in stainless steel and gunmetal. They can be connected to the hydrant valves, nozzles and breechings.

Stainless Steel has a higher tensile or mechanical strength than the bronze fire hose delivery coupling. They can withstand higher working pressures than bronze couplings. Stainless steel does not corrode and can survive harsh industrial environments.

We all are aware of the devastating consequences that a fire outbreak can cause. It is why, for all of us and mostly in larger building premises, it is very important to install high-quality fire safety equipment and accessories.
Having a space equipped with quality fire fighting gadgets is worth the money spending. It will allow you and all other dwellings within the space to feel safe and secure, in case there is a fire outbreak. When you decide to install a fire safety system on your premise, every bit counts. But, amongst all, one very critical gadget is the Hydrant Valve.

What is a hydrant valve?

The fire hydrant valve is a part of the fire hydrant system and is a crucial component in providing an efficient and effective means of extinguishing fires. The hydrant system allows firefighters to attack the source or seat of the fire from a distance, and hydrant valves are its outlets that deliver water with intense pressure, to drowse the fire.
It is a simple valve-like device, similar to normal taps that deliver water constantly as long as there is water at the source and as soon as you open it. These valves are attached to the fire hose by fire fighting personnel to throw pressurized water out to fight a fire.